AMK SPEAKERS: THE INNOVATORS OF SELF AMPLIFIED SPEAKERS

AMK DS62-B
DS62-B-X (AES67 Compatible)

1 active and 1 passive

Dante network enabled speaker

Channels (zones): 2

The AMK DS62-B is a Dante™ audio network addressable and self-amplified ceiling speaker system. The speaker is powered by PoE+ network switch meaning no external power supply is required.

The speaker includes a Class D amplifier which provides effective use of power. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

The system comes with 6.5” coaxial 25W loudspeaker driver, CX602, that has excellent dispersion, wide bandwidth and a smooth frequency response which makes this the top choice for today’s overhead commercial applications.

One PoE+ amplified speaker can power a total of (2) speakers, one active and one passive speaker.

This assembly can be used in wide range of projects for paging and background music applications. The DS62-B is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms.

Channel Zoning Illustration

AMK Dante Ceiling Speaker Advantage
* No need to have separate dante enabled amp or I/O interface * A Single RJ45 connection to main active speaker with two conductor wire connection to each of the three passive speakers with separate channels. * Highly efficient speaker driver due to barium ferrite magnet. * Cost effective simple one system solution. * 2’ x 2’ ceiling tile lay in system for fast and easy installation and visually attractive for tile ceiling environment
System Specification
Frequency Response		100 Hz - 20 kHz (+/- 3dB)
Maximum SPL at 1M		102 dB
Voice-coil diameter		1."
Magnet		Barium Ferrite (for high efficiency of the speaker driver)
Nominal Coverage Angle (500Hz – 4kHz Average)		140° Conical Average
Audio Input		Dante Audio via Ethernet
Output Power		10W / Channel (5W per speaker)
Signal to Noise Ratio		>99dB
Power consumption		2 Watts Standby, 25 Watts Maximum
Input connector on active speaker		RJ-45
Maximum wire length to companion speakers		100ft at 18AWG
PoE+		IEEE 802.3at-2009
Controls		Dante™ controller software
Physical Speaker Data
Tweeter		13mm polyamide hard dome
Woofer Cone		Polypropylene
Surround Material		Inverted rubber Surround
Crossover Frequency		5.0 kHz
Enclosure Depth with Handybox		8.75”
Grille Dimension		24.0” x 24.0”
Net weight of the speaker		16.0 lbs
Shipping Weight (1 box of 2 speakers)		42.0 lbs
Frequency Response


Speaker Configuration

Polar Responses
250 Hz	500 Hz	1 kHz	2 kHz
3 kHz	4 kHz	8 kHz	16 kHz

Architect's & Engineer's Specifications
The powered loudspeaker system shall be AMK DS62-B. The speaker shall feature Audinate / Dante™ network audio signal that broadcasts 1 channel of audio. The speaker system shall consist of a set of 2 speakers broadcasting different channels of audio for different zones. The Ethernet network must have PoE+ to provide the power that is needed for the system. The active unit of the system shall have one RJ-45 jack for network audio connection. The speaker unit in the system shall be of the coaxial type with an 6.5" woofer of polypropylene, an inverted rubber surround, and a 1" polyamide soft dome tweeter mounted on a post. The transducer in the loudspeaker system shall be AMK CX 602 coaxial loudspeaker. The woofer shall have a 13 oz. (369g) Barium Ferrite magnet. The two transducer sections shall be coupled through a built-in capacitor bypass crossover. The crossover frequency shall be at 5.0 kHz. The low frequency transducer shall have 1" (25.4mm) voice coil and the high frequency transducer shall have 0.51" (13mm) voice coil. The system shall have a frequency response of 65 Hz- 20 kHz (+/- 10dB). The depth of all 2 enclosures shall be 8.25 inches. The rim diameter shall be 11.75”. The enclosure diameter shall be 9.25”. The depth of the enclosures shall not exceed 8.25”. The system shall include 2 tile bridges. The system shall have a metal strap for attachment to a structure for seismic protection. The total weight of the each of the speaker enclosure, tile bridge, and grille shall not exceed 9.0 lbs. The loudspeaker system shall be AMK Innovations model DS62-B. Conforms to EIA Standards: RS-276-A, RS-278-B, RS-426-A.