Tel:   800-438-4026

Innovators in High Performance Loudspeakers

 

 

 

DS82-B-X

1 active and 1 passive

Dante network enabled speaker set

Channels (zones): 2

      

Data / Spec Sheet

Installation Manual

Price Quote Request


The AMK DS82-B-X is a Dante™ audio network addressable and self-amplified ceiling speaker system. The speaker is powered by PoE+ network switch meaning no external power supply is required. The speaker includes a Class D amplifier which provides effective use of power. This system will solve the issue of having to provide a separate amplifier or I/O interface for speaker installations.

The system comes with 8” coaxial 40W loudspeaker driver, CX802, that has excellent dispersion, wide bandwidth and a smooth frequency response makes this the top choice for today’s overhead commercial applications.

One PoE+ amplified speaker can power a total of (2) speakers, one active and one passive speaker. The passive speaker installed at different zone for different channel of broadcasting.

The audio network system is also compatible with AES67 and it is Dante Domain Manager Ready. Which makes this speaker system to be flexible with other audio network systems as well.

This assembly can be used in wide range of projects for paging and background music applications. The DS82-B-X is ideal for hotels, education, hospitals, retail stores, performing art centers, restaurants, airports, houses of worship, and board rooms.


  Channel Zoning Illustration



  AMK Dante Ceiling Speaker Advantage

 

  *  No need to have separate dante enabled amp or I/O interface

  *  A Single RJ45 connection to main active speaker with two conductor wire connection to each of
       the three passive speakers with separate channels.

  * Highly efficient speaker driver due to barium ferrite magnet.

  *  Cost effective simple one system solution. 

   *  Dante Domain Manager Ready

   *  AES67 compatible

   *  UL 2043 Listed

 
 System Specification
  Frequency Response   50 Hz - 20 kHz (+/- 3dB)
  Maximum SPL at 1M   105 dB
  Voice-coil diameter   1."
  Magnet   Barium Ferrite (for high efficiency of the speaker driver)

  Nominal Coverage Angle (500Hz – 4kHz Average)

  110° Conical Average
  Audio Input   Dante Audio via Ethernet
  Output Power   5W
  Signal to Noise Ratio   >99dB
   Power consumption   2 Watts Standby, 25 Watts Maximum
   Input connector on active speaker   RJ-45  
   Maximum wire length to companion speakers   100ft at 18AWG
   PoE+   IEEE 802.3at-2009
   Audio Network System Compatibility   Dante / Dante Domain Manager / AES67
   Controls   Dante™ controller software
 Physical Speaker Data
  Tweeter   13mm polyamide hard dome
  Woofer Cone   Polypropylene
  Surround Material   Inverted rubber Surround
  Crossover Frequency   5.5 kHz
  Enclosure Depth with Handybox   8.75”
  Diameter of the Enclosure    9.25" 
  Diameter of the Grille   12.75" 
  Net weight of the speaker   10.0 lbs
  Shipping Weight (2 boxes of 4 speakers)   60.0 lbs
       
 Frequency Response

 Speaker Configuration

 
 Polar Responses
250 Hz

500 Hz
1 kHz
2 kHz
  
3 kHz
4 kHz
8 kHz
16 kHz
       
 Architect's & Engineer's Specifications

The powered loudspeaker system shall be AMK DS82-B-X. The speaker shall feature Audinate / Dante™ network audio signal that broadcasts 1 channel of audio. The speaker system shall consist of a set of 2 speakers broadcasting different channels of audio for different zones.

The Ethernet network must have PoE+ to provide the power that is needed for the system.

The active unit of the system shall have one RJ-45 jack for network audio connection. Then there shall be (1) one of the two position phoenix type (euro) connection. The connection shall be for the passive speaker at different zone.

The transducer in the loudspeaker system shall be AMK CX 802 coaxial loudspeaker. The woofer shall have a 20 oz. Barium Ferrite magnet. The two reproducer sections shall be coupled through a built-in capacitor bypass crossover. The crossover frequency shall be at 5.5 kHz. The low frequency reproducer shall have 1" (25.4mm) voice coil and the high frequency reproducer shall have 0.51" (13mm) voice coil.

The system shall have a frequency response of 55 Hz- 20 kHz (+/- 5dB). The power handling shall be 40watts at 8 ohm impedance. The sensitivity shall be 91dB at 1watt / 1meter.

The depth of all 2 enclosures shall be 8.25 inches. The rim diameter shall be 11.75”. The enclosure diameter shall be 9.25”. The depth of the enclosures shall not exceed 8.25”. The system shall include 2 tile bridges. The system shall have a metal strap for attachment to a structure for seismic protection.

The total weight of the each of the speaker enclosure, tile bridge, and grille shall not exceed 9.0 lbs.

The loudspeaker system shall be AMK Innovations model DS82-B-X.

Conforms to EIA Standards: RS-276-A, RS-278-B, RS-426-A.
















































































































































































































































































































































































Top